Re: Does someone have both x50v and serial cable ?

I have no idea..........
Maybe you will get nothing until USB console or CF card mounting works......

Salem Salemixu 写道:
> No no, i don't see anything in the LCD!
> I have the x50v, and on the LCD it stays the image of haret and i can't
> do anything.
> This output is when i telnet from my PC to the PDA where Haret listens
> to the port 9999, and i use synce to connect to the PDA.
>
>
> Fisherss wrote:
>
>>Yes, it's normal. If your x50 are 416 version, you should see something
>>on your LCD, like the framebuffer on PC.
>>The output like Uncompressing Linux..... should be gotten via serial
>>cable, I know other handhelds.org guys can get console through USB
>>cradle, but I don't know how to configure it......
>>
>>Salem Salemixu 写道:
>>
>>
>>>The only output I can view when using haret is when i click on Listen
>>>for network connection and i telnet from the computer to the pda, then i
>>>click on Run and the output of the telnet window is this:
>>>
>>> # telnet 192.168.131.201 9999
>>>Trying 192.168.131.201...
>>>Connected to 192.168.131.201.
>>>Escape character is '^]'.
>>>Welcome, this is HaRET running on WindowsCE v4.21
>>>Minimal virtual address: 00010000, maximal virtual address: 7fffffff
>>>CPU is Intel ARM arch 5TE revision 0 product 17 stepping 4 running in
>>>system mode
>>>Enter 'HELP' for a short command summary.
>>>
>>>HaRET(1)# Physical kernel address: a8008000
>>>Preloader physical/virtual address: ab086000
>>>Physical initrd address: a8408000
>>>Goodbye cruel world ...
>>>
>>>
>>>And after this i have to do a reset on the pda and kill the telnet
>>>process.
>>>
>>>
>>
> _______________________________________________
> Aximx30-port mailing list
> Aximx30-port_at_handhelds.org
> https://www.handhelds.org/mailman/listinfo/aximx30-port
>
>
Received on Fri Jun 17 2005 - 08:42:46 EDT